Downloads

DocumentsDate added

Challenges Ahead for WiMAX Test from RF Design (599.91 KB)

2007-05-21

Addressing the measurement issues related to WiMAX are key to ensuring its market success. Read how LitePoint offers multiple solutions to address R&D and manufacturing needs.

Combining CCDF and EVM to Assess 802.11 Transmitters (35.08 KB)

2004-09-01

Multicarrier orthogonal frequency division multiplex (OFDM) signals are employed by 802.11a/g to support the highest data rates under the 802.11a/b/g standards. Christian Olgaard, LitePoint co-founder and VP engineering presents how they pose challenges that wireless LAN (WLAN) product designers and manufacturers should be aware of.

Evaluating the Impact of Pulsed Phase Noise on 802.11a/g OFDM Transmit Performance (117.96 KB)

2004-11-01

Carsten Andersen & Dick Walvis, members of the LitePoint technical staff. point out how using advanced WLAN test instruments, the designer can assess the impact of pulsed phase noise in the design tip.

IQnav (542.3 KB)

2008-12-10

Keeping Test Costs Down as GPS Goes Everywhere

IQnav (77.86 KB)

2008-12-11

GPS Testing Tips and Tricks

MIMO WLAN Test Methodologies for Manufacturing (473.5 KB)

2007-06-01

Four different methodologies are used for testing MIMO WLAN chipsets and products. In this RF Design article, Dick Walvis and Sireesha Mallipeddi of LitePoint demonstrate how each methodology has its advantages and disadvantages.

Real-world Certified Wireless USB Testing - Embedded Computing May 2008 (278.94 KB)

2008-05-16

As wireless USB makes its debut, designers are questioning if development and production testing align with realistic cost expectations. Onno Harms and Rob Brownstein of LitePoint explore in this article how using a test system built to capture and analyze wireless USB signals provides comprehensive test results that meet development and production needs within budget and time constraints.

Real-world WiMAX MIMO Test - EE Times Feb 11, 2008 (158.81 KB)

2008-02-11

Together, MIMO and WiMAX promise even greater data speeds but add hardware and software complexity to the mix. Onno Harms and Rob Brownstein of LitePoint address the challenge of minimizing costs while taking advantage of MIMO's benefits--and costs are more than just bills of materials.

Rob Brownstein Interviewed by EDNChina May 2008 - in Chinese (477.55 KB)

2008-05-23

EDNChina hears from Rob Brownstein, VP MR&C

Speeding Up Manufacturing Test of WiMAX Equipment (356.38 KB)

2007-05-21

Addressing the measurement issues related to WiMAX are key to ensuring its market success. Read how Christian Olgaard, LitePoint co-founder & VP engineering, shows that by optimizing the DUT's driver to generate non-linked based signals leads to test times many time faster than currently possible.