Manufacturing Wireless Test

WLAN Manufacturing Test Solution

ImageLitePoint IQflex 802.11a/b/g/n WLAN Manufacturing Test Solution is an all-in-one test instrument developed specifically for production RF testing of 802.11a/b/g/n, MIMO WLAN and optional Bluetooth products. The instrument replaces all traditional test equipment used in a WLAN production line and integrates the functionality of a power meter and spectrum analyzer with a vector signal analyzer (VSA) and vector signal generator (VSG) in a single, small form-factor box.  

IQflex WLAN Overview     Brochure

WiMAX Test Solution

ImageLitePoint IQmax® Wireless Test System is tailored to the needs of volume manufacturing and Design Verification Test (DVT) for WiMAX and WiFi devices. A range of LitePoint IQmax models allows for complete coverage of these standards in a single test station maximizing capital equipment utilization and flexibility. IQmax supports multiple standards including WiMAX (802.16d/e), WiFi (802.11a/b/g/n), Bluetooth (1.0 and EDR), and ZigBee (802.15.4).

IQmax Overview     Brochure

WiMedia UWB Test Solution 

ImageIQultra™ is an integrated instrument for PHY layer testing of WiMedia devices based on MB-OFDM modulation (Multi-Band – Orthogonal Frequency Division Multiplexing). IQultra offers coverage of all 6 band groups within the WiMedia specification from 3.1 GHz to 10.6 GHz using a unique high bandwidth vector signal analyzer (VSA) for transmit (TX) tests along with a built in attenuator and an external or internal reference DUT for receive (RX) tests.

IQultra Overview             Brochure

GPS Test Solution

ImageThe LitePoint IQnav™ tester is an integrated GPS measurement solution designed for product development, design verification, Quality Assurance (QA), and volume manufacturing test for cellular handset, module, and personal navigation device makers. It provides GPS signal generation capability for L1 (1575.42 MHz) frequencies. Easily test GPS / WiFi combo device using popular IQflex one-box tester.{

IQnav Overview                 Brochure

Multiport MIMO Test Adapter

ImageThe Multiport Test Adapter (MPTA) is designed to use with LitePoint IQview and IQflex one-box testers for accurate low-cost manufacturing testing of 802.11n (MIMO) products.  The MPTA enables testing of a MIMO DUT with the benefits of both a close coupled control, fast RF switching test and composite EVM test methodologies. Close coupled control allows the Multiport Test Adapter to become an extension to the internal test resources of the IQflex and IQview instruments enabling fast test times. Combining both composite and fast switching test methodologies enables full Tx and Rx manufacturing testing in MIMO mode along with accurate EVM testing. Rx sensitivity testing for verifying MRC which verifies MIMO processing.

Datasheet

Production Test Software

LitePoint IQfact Production Test Software is optimized for the most popular WLAN, Bluetooth and MIMO chipsets. The test programs are a result of LitePoint’s partnership with leading chipset manufacturers such as Broadcom, Marvell and Texas Instruments, and offer wireless OEMs a quick, easy and cost-effective way to develop and test chipset-specific solutions.
IQfact Software Overview     Brochure

Multiport MIMO Test Adapter

ImageThe Multiport Test Adapter (MPTA) is designed to use with LitePoint IQview and IQflex one-box testers for accurate low-cost manufacturing testing of 802.11n (MIMO) products.  The MPTA enables testing of a MIMO DUT with the benefits of both a close coupled control, fast RF switching test and composite EVM test methodologies. Close coupled control allows the Multiport Test Adapter to become an extension to the internal test resources of the IQflex and IQview instruments enabling fast test times. Combining both composite and fast switching test methodologies enables full Tx and Rx manufacturing testing in MIMO mode along with accurate EVM testing. Rx sensitivity testing for verifying MRC which verifies MIMO processing.

Datasheet

Bluetooth Test Manufacturing Test Software

ImageLitePoint Bluetooth Manufacturing Tests Software provides manufacturing test capability for Bluetooth v1.1, v1.2, v2.0 and enhanced data rate (EDR) products using IQview, IQmax, or IQflex One-Box Testers . The package includes new API commands and integration of FM modulation support into IQsignal Software analysis package (if applicable). 


Bluetooth Software Overview    Brochure

ZigBee Manufacturing Test Software

ImageLitePoint ZigBee® Manufacturing Test Software provides manufacturing test capability for ZigBee 802.15.4-based products using IQview or IQflex one-box test instruments. The package includes new API commands and integration of Offset Quadrature Phase Shift Keying (O-QPSK) modulation support into the LitePoint IQsignal™ Analysis Software (IQview installations only). When installed, the ZigBee Software Package is automatically recognized by the IQview/IQflex test analysis software and the software integrates seamlessly into the test environment. The ZigBee device under test (DUT) test commands are made through the chip vendor's test control interface for fastest set-up times, while LitePoint capture-once-measure-all hardware implementation allows full Rx and Tx testing with very few signal captures for the fastest test times.

ZigBee Software Overview Brochure

Next Steps