IQnxn Plus

LitePoint IQnxn^Plus® is an innovative testing solution for complex WiFi and WiMAX devices. Ideal for an R&D environment, IQnxn^Plus delivers the analytical power to verify device performance operating in a real world Multiple Input Multiple Output (MIMO) environment for both WiMAX and WLAN products.

Up to 4 fully independent TX and RX streams for accurate characterization
Single In Single Out (SISO) and Multiple Input Multiple Output (MIMO) test capability:

802.11a/b/g
802.11n (HT20, HT40)
802.16d/e

Multiple, Simultaneous Transmit (TX) and Receive (RX) data streams deliver true, reliable MIMO analysis Validate beamforming applications using phase aligned test signals
Powerful IQsignal^™ Graphical User Interface (GUI) enables analysis of WLAN and WiMAX signals

Analysis can be performed offline on previously stored captures, allowing device performance to be analyzed at any time

True MIMO Testing Made Easy
Fully characterize MIMO devices with up to 4 independent streams using real world signal conditions.

Achieve Highest Manufacturing Yields
True MIMO testing in R&D ensures best possible performance margin allowing simpler test methods in manufacturing.

Advanced Analysis Tools
Graphical analysis tools display all common 802.11 test metrics including EVM, mask, EVM per carrier, and CCDF on a per stream basis to pinpoint transmitter failure modes.

Support for both spatial expansion and direct mapping modes of WLAN MIMO transmission.

Ready for Beamforming
Common Local Oscillator (LO) and synchronized triggering allows phase alignment of test signals to verify beamforming applications.

Develop Test Software Once
Program compatibility to IQflex ensures test programs developed using IQnxn^Plus in SISO mode can be 100% re-used on IQflex^® for manufacturing test.

WiFi and WiMAX MIMO Devices Including:
Smartphones
Tablets
Access Points
Laptops
WiFi / WiMAX Modules
The system specifically targets MIMO testing, but it also tests SISO devices. IQnxn^Plus is ideal for the research and development environment.

VSA RF Frequency Range:
2150 - 2700 MHz
3300 – 3800 MHz
4900 - 6000 MHz

VSA RF Maximum Input Power:
+30 dBm

VSA Capture IF Bandwidth:
60 MHz

VSG RF Output Frequency Range:
2150 - 2700 MHz
3300 – 3800 MHz
4900 - 6000 MHz

VSG RF Output Power Range:
-95 to 0 dBm (modulated) -95 to +10 dBm (CW)

VSG IF Bandwidth:

70 MHz

Software Interface:
10/100 Mbps Ethernet

Technologies Supported:
802.11a/b/g 802.11n SISO
802.11n MIMO
802.16d/e SISO / MIMO

各種テスト規格に対応したソリューション

テストシステム

テストソフトウェア

Solutions Designed for
the Chipsets You are Using Today

会社概要

IQnxn Plus

成功事例

リソース

関連製品

会社情報

採用情報

Contact Us

利用規約

お問い合わせ

ブログの購読登録

連絡方法

各種テスト規格に対応したソリューション

テスト システム

テスト ソフトウェア

Solutions Designed for the Chipsets You are Using Today

会社概要

IQnxn Plus

成功事例

リソース

関連製品

会社情報

採用情報

Contact Us

利用規約

お問い合わせ

ブログの購読登録

連絡方法

テストシステム

テストソフトウェア

Solutions Designed for
the Chipsets You are Using Today